Description:

FLUTEPRINT it's an flexo printer slotter die cutter machine. its a high efficient equipment for making corrugated boxes. you can do flexo printing on 3-ply or 5-ply board and also can do creasing, trimming, slotting, L cutting and die cutting on corrugated boxes at one time.
Characteristics:
1. This flexo printer slotter die cutter can do flexo printing on 3-ply or 5-ply board and it also can do creasing, trimming, slotting, L cutting and die cutting of corrugated boxes at one time.
Item Unit 2600 (wall to wall)
Max Feeding Size mm 1200×2400
Max Printing Size mm 1200×2300
Min Feeding Size mm 350×550
Printing plate thickness mm 5
Design speed Sheet/min 120
Economic speed Sheet/min 100
Main motor power KW 11
Total weight T 15
Register precision mm Four color ±0.5
Slotting precision mm ±1.5
Min space of
slotting obverse mm 130×130×130×130
reverse 210×50×210×50
Dimension(L×H×W) mm 9200×3400×1900
2.2. Lead Edge Feeder
NO Item Specification
1 Machine unit separation and locking up (1) Electric control the separation or locking up and equipped with alarm .Ensure that personnel safety
(2) Transmission shaft with friction type clutch, Avoid error operating while damage machine.
(3) Pneumatic type chain device.
(4) Main engine motor start-up protection device.
3 Lead edge feeder
Induced draft Auxiliary to deliver the paper, Suction fan 4KW. According to the cardboard bending of the different conditions. Adjusting suction. Guarantee for paper smoothly.
5 Feeding paper roller
(1) 405 Outside diameter for 163mm.
(2) The paper-feeding roller is wrapped with wear rubber and subject to balance alignment.
(3) The lower paper-feeding roller is empaistic and chrome plated.

2.3. Printing unit
NO Item Specification
1 Printing Plate (1) Outer diameter ?395mm,(include plate? 405mm)
(2) Steel pipe surface treated by grinding, chrome plated.
(3) Balance adjustment treated, make running steady.
2 Printing Pressure Roller (1) Model 405 outer diameter is ?124mm.
(2) Steel pipe surface treated by grinding, chrome plated.
(3) Balance adjustment treated, make running steady.
(4) Printing press roller space dial manual adjustment, adjustable range: 0-12mm
3 Feed roller
(Upper and Under rollers) (1) Upper roller: outer diameter ?85mm thick-walled steel pipe, equipped with 2 paper feed ring.
(2) Under roller:305 outer diameter ?124. thick-walled steel pipe, surface plated chrome.
(3) Paper feeding roller space dial manual adjustment, adjustable range: 0-12mm
4 Steel Material ANILOX Roller (1) 405 outer diameter ?180mm
(2) Steel pipe surface grinding, embossing, plated chrome.
(3) Balance adjustment treated, make running steady.
(4) Mesh quantity : 200, 220, 220, 250
(5) Auto up and down device. ( when paper feeding the anilox roller downward connect with the printing plate; when stop the feeding, the anilox roller upward separate with the printing plate)
(6) Anilox roller equipped with sprag clutch, for convenience ink distribution and cleaning.
5 Rubber Roller (1) 405 outer diameter ?180mm
(2) Steel surface enclose hard-wearing rubber, Balance adjustment treated.
(3) Rubber camber specially grinding, good ink transport.
6 phase adjusting device (1) Planet gear structure
(2) Printing phase adopt electric digital type 360o adjustment.(machine running or stop can adjustable)
(3) Manual adjusting transverse position, adjustable distance 7 mm
(4) Auto restoration system after clean printing plate
7 Water base ink cycle (1) Pneumatic Diaphragm Pump, supply ink steady, operation and maintain easily.
(2) Equipped with ink filter screen, filter impurity.
(3) Stainless material ink fountain.
8 Printing phase fixed device (1) Air cylinder type brake structure
When machinery separate or adjusting phase, the brake device control the machine moving, keep the position of the gear fixed.
2.4. Slotting unit
NO Item Specification
1 Creasing device (1) Roller diameter ?110mm high quality steel pipe, surface grinding, chromeplated, moving steady.
(2) Balance adjustment treated, make running steady.
(3) Creasing roller space dial manual adjustment, adjustable range: 0-12mm
2 Slotting cutter
horizontal movement adjusting device (1) Diameter of axle ?155mm high quality steel pipe, grinding, hard chrome plating, move stably
(2) The width of slotting knives: 7mm
(3) Alloy steel material, heat treatment, grinding teeth shape slotting blade. High hardness and toughness
(4) Alloy steel material, heat treatment, grinding bimetallic strip type Trimming knife. Sharp, high precision
(5) Creasing roller, guiding wheel, slotting blade horizontal movement position, adopt PLC control, touch screen, can store 9999 orders.
3 Slotting phase adjusting device (1) Planetary gear structure
(2) Adopt PLC, touch screen control and electric digital display 360° adjustment (adjustment can be done while machine running and stop): can store 9999 orders.
4 Portable hole die holder (optional) (1)Upper die holder width 100mm, under die holder width 160mm, attach rubber mat.
(2)Hole die holder dimension: 90mm×25mm
5 Operation control switch Operation panel equipped with 10.4 inch touch screen, can control paper feed unit, printing unit, slotting unit, die-cutting unit, operation convenient.

2.5. Stacking part
NO Item Specification
1 Receive paper arm (1)Can chose manual type or automatic type
(2) Receive paper transmission belt, independent adjusting tension, not be subject to the equal length belts of limit.
2 Receiver worktable
go up and down (1) Strong Force chain transmission
(2) Stacking height: 1600mm
(3) Transmission motors attach brake function, make the worktable on the fixed position, and will not glide.
(4) Add assembly heavy iron device, make the worktable under control, and ensure the safety of workers.
(5) Flat wrinkle climbing belt, for prevent cardboard sliding.
3 Receive paper
baffle (1) Pneumatic receive paper baffle, when the cardboard stacking to presupposed height, the pallet will reach out automatically, then receive the cardboard.
(2) Back baffle position adopt manually adjustment.


2.6. Transmission gear
Item Specification
Mina transmission gear Material: 45# steel, high frequency quenching, hardness: HRC 50-55o
2.7. Motor list
Name
Original Specification Quantity
Paper feed unit
1 Main motor HEBEI
HENGSHUI 11KW frequency motor 1
2 Machine unit separation and locking up HEBEI 0.75KW 1/59
Reducer motor 1
3 Suction Blower Fan HEBEI 4KW 1
Printing unit
1 Phase adjusting ZHEJIANG 0.18kw 1/50
reducer motor 4
2 Rubber roller Load-free system ZHEJIANG 0.75kw 1/50
Reducer motor 4
Slotting unit
1 Phase Adjusting ZHEJIANG 0.25kw 1/50
Reducer motor 1
Stack unit
1 Transmission belt QUFU 3kw Adjustable Speed motor 1
2 Vibrating motor HEBEI 3kw reducer motor
3 Receiver worktable
go up and down WUXI 2.2kw 1/87
Reducer Motor 1